0
Days
0
Hours
0
Minutes
0
Seconds
LABOR DAY SALE • 15% OFF SITEWIDE • PRICES AS MARKED
Your cart is empty :(
Continue shoppingYour cart
Estimated total:
$0.00 USD
LABOR DAY SALE • 15% OFF SITEWIDE • PRICES AS MARKED
KL 6275
💳 Get it today, pay over time with Shop Pay Installments.
Couldn't load pickup availability
HIGH PERFORMANCE, COMPACT FOOTPRINT
Don’t let the streamlined profile fool you; the Model 6275 delivers a consistent, high-pressure 150 PSI air supply engineered explicitly to power compact air horns and 220 Dual ABS train horns. Providing rapid recovery times and instantaneous pneumatic response, this system is optimized for vehicles where mounting real estate is restricted but maximum acoustic performance is mandatory.
BUILT FOR THE ELEMENTS
Designed to survive and thrive in punishing off-road and highway environments, this system features a fully sealed moisture- and dust-resistant compressor pump. The ruggedized, oil-less waterproof design actively repels trail grit, mud, high humidity, and abrasive road debris, ensuring dependable, long-term performance under the most grueling conditions.
ENGINEERED FOR LONGEVITY
The 6275 architecture includes a heavy-duty integrated check valve and a remote-mount Snorkel Kit air intake system designed to pull clean, moisture-free air from a protected location inside the vehicle cab. Paired with a robust 1.5-gallon internally coated steel air tank that actively fights rust scaling, this configuration stands as a reliable, long-term onboard air companion.
THE VERDICT: The ultimate medium-duty 150 PSI pneumatic center for space-limited applications. The Model 6275 delivers premium, fully waterproofed air support for compact horn systems and air accessories without requiring extensive chassis modifications.
COMPRESSOR SPECIFICATIONS
| Feature | Feature Details |
|---|---|
| Part Number | Model 6275RC |
| Warranty | 1-Year |
| Max Pressure | 150 PSI |
| Duty Cycle | 50% @ 100 PSI (@ 72° F) |
| Max Tank Size | 1.5 Gallon |
| Compressor Type | Waterproof Sealed, Oil-less |
| Voltage | 12-Volt DC |
| Motor Type | Permanent Magnetic Motor |
| Max Amp Draw | 20 Amps |
| Dimensions | 8.25” L x 4” W x 6.50” H |
| Mounting Holes | 6.14” L x 3.31” W (5mm Diameter) |
| Mounting Note | Mountable in any position except upside down |
| Shipping Weight | 9 lbs |
| Pressure Switch | P/N 2151 (Works with 52175 Safety Valve) |
AIR TANK SPECIFICATIONS
| Feature | Details |
|---|---|
| Model | 6275RT 1.5-Gallon Air Tank |
| Warranty | 1-Year |
| Tank Capacity | 1.5 Gallon |
| Construction | All Steel Design (Gloss Black Epoxy Finish) |
| Internal Coating | Internal Cortec Coating for Corrosion Resistance |
| Mounting Legs | 2 Legs w/ 4 Mounting Points |
| Air Tank Ports | 5 - 1/4" NPT Ports |
| Mounting Hardware | Fitting Pack - 4 Bolts, Nuts, Washers |
| Max Pressure | 150 PSI |
| Dimensions | 15” L x 6” W x 8” H |
AIR TANK FILL RATES
| Tank Capacity | Tank Pressure Range | Tank Fill Rate |
|---|---|---|
| .5 Gallon | 0 - 150 PSI | 1:31 Sec. (+/- 5 Sec.) |
| .5 Gallon | 110 - 150 PSI | 0:26 Sec. (+/- 3 Sec.) |
| 1 Gallon | 0 - 150 PSI | 2:37 Sec. (+/- 10 Sec.) |
| 1 Gallon | 110 - 150 PSI | 0:38 Sec. (+/- 5 Sec.) |

$297.45
Kleinn Automotive Accessories stands behind the quality and craftsmanship of our products. Our products are covered against defects in materials and workmanship when properly installed and used under normal operating conditions, subject to the terms below.
Unless otherwise specified, Kleinn Automotive Accessories products are covered by a 1-year limited warranty from the original date of purchase.
This warranty applies to the original purchaser and covers defects in materials and workmanship under normal use.
If a product is determined to have a covered warranty defect, Kleinn Automotive Accessories will, at its discretion, repair or replace the defective product or component.
This warranty does not cover damage or failure resulting from:
Kleinn Automotive Accessories is not responsible for installation or removal charges, diagnostic fees, labor costs, vehicle downtime, loss of use, or other incidental or consequential expenses associated with warranty service.
To request warranty service, email warranty@kleinn.com with the following information:
A Kleinn representative will review your claim and may first attempt to resolve the issue through technical support.
If the product needs to be returned for inspection, Kleinn will provide a Return Authorization (RA) number and return instructions. Products should not be returned without prior authorization.
Once received, the product will be inspected to determine whether the issue is covered under warranty. If a covered defect in materials or workmanship is confirmed, Kleinn will, at its discretion, repair or replace the defective product or component.
If inspection determines that the product does not have a covered warranty defect, the product may be returned to the customer, and the customer will be responsible for applicable return shipping costs.
This limited warranty gives you specific legal rights. You may also have other rights, which vary from state to state.
Your item must be in its original unused condition to be returned, unless there is a manufacturer defect. You must return the item within 30 days of your purchase.
1. Please email support@kleinn.com to request a refund and we will assign you a Return Authorization #.
2. Mail your returned item to:
Kleinn Automotive Accessories
Returns Department
4045 N Highway Drive
Tucson, AZ 85705
3. Include in your package a signed letter stating the reason for your return and the original receipt.
Merchandise that has been worn, used, or altered will not be accepted for return or exchange.
All returns are subject to a 15% restocking fee, which will be deducted from your refund. If shipping and handling fees were applied to your order, they are non-refundable.