Model 6270: Universal Light Duty 130 PSI 1-Gallon Compressed Air System

Skip to product information

KL 6270

Regular price $269.95
Sale price $269.95 Regular price $269.95

💳 Get it today, pay over time with Shop Pay Installments.

In stock

PROP 65 WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

MODEL 6270: ULTRA COMPACT 130 PSI ONBOARD AIR SYSTEM

ULTRA COMPACT & WATERPROOF

The Model 6270 onboard air system takes Kleinn’s legendary engineering and packs it into our most space-saving layout. Explicitly optimized for tight installations and compact Kleinn air horns, this system delivers continuous, high-pressure pneumatic security without demanding massive frame alterations. For builds utilizing larger, multi-bell locomotive horn racks, we recommend stepping up to our high-capacity 6275, 6350, or 6450 series systems.

BUILT FOR HARSH CONDITIONS

At the center of this configuration is a high-efficiency 130 PSI waterproof oil-less compressor running a 25% duty cycle, making it a rugged addition to engine bays or narrow frame rail gaps. The fully sealed, dust- and moisture-resistant design shields critical moving parts from road debris, deep water crossings, and thick trail mud for trouble-free execution.

LONG-TERM RELIABILITY

To maximize system longevity, the 6270 is outfited with a heavy-duty integrated check valve and a Snorkel Kit remote air intake setup. This allowing you to route the intake pathway to a protected position inside the vehicle interior cab space, keeping moisture, fine silt, and hot engine dust away from your pump internals.

Why Choose Model 6270?

  • Ultra Compact: Streamlined micro-footprint layout fits easily inside restricted vehicle engine bays or frame spaces where larger system setups cannot pass.
  • Horn Optimized: Tuned perfectly to supply instant high-pressure air delivery for compact multi-tone air horn layouts.
  • Waterproof Design: Fully sealed submersible pump housing keeps trail mud, debris fields, and rain out of the hardware loop.
  • Snorkel Kit Included: Relocated clean air intake path extends internal component lifespan and blocks water ingestion.
  • Maintenance Free: Advanced pro-tier oil-less compressor engineering requires absolutely zero servicing or lubrication upkeep.

THE VERDICT: The ultimate entry-level system for restricted footprints. Model 6270 blends full submersible protection and rugged 130 PSI power into a mini architecture designed to easily modernize any compact vehicle or UTV build.

What's in the Box?

  • 6270RC: 130 PSI ultra-compact waterproof sealed air compressor
  • 6270RT: 1-gallon heavy-duty steel air tank with internal anti-corrosion coating
  • Snorkel Kit: Remote air intake filtration system with 10 feet of protective air tubing
  • Fitting Pack: Pre-calibrated pressure switch, automated safety blow-off valve, and brass drain port valve
  • Installation Kit: High-pressure airline, complete wiring harness loop, and all required high-strength mounting hardware fasteners

COMPRESSOR SPECIFICATIONS

Feature Details
Part Number 6270RC
Warranty 1-Year
Max Pressure 130 PSI
Duty Cycle 25% @ 100 PSI
Flow Rate 1.56 CFM @ 0 PSI
Compressor Type Waterproof Sealed, Oil-less
Voltage 12V DC
Motor Type Permanent Magnetic
Max Tank Size 1.5 Gallon
Max Amp Draw 14 Amps
Dimensions 6.4” x 3.5” x 4.6”
Mounting Holes 6.14” x 2.76”
Mounting Note Any position except upside down
Shipping Weight 7 lbs

AIR TANK SPECIFICATIONS

Feature Details
Model 6270RT
Warranty 1-Year
Capacity 1 Gallon
Construction Steel / Gloss Black
Internal Coating Cortec Anti-Corrosion
Mounting Legs 2 Legs / 4 Points
Ports 5 × 1/4" NPT
Max Pressure 150 PSI
Dimensions 11” x 6” x 8"

AIR TANK FILL RATES

Tank Pressure Range Fill Rate
0.5 Gallon 0-150 PSI 1:11 ±5 sec
0.5 Gallon 110-150 PSI 0:26 ±3 sec
1 Gallon 0-150 PSI 1:57 ±10 sec
1 Gallon 110-150 PSI 0:38 ±5 sec
Model 6270: Universal Light Duty 130 PSI 1-Gallon Compressed Air System

$269.95

Does it come with a warranty?

Kleinn Automotive Accessories Limited Warranty

Kleinn Automotive Accessories stands behind the quality and craftsmanship of our products. Our products are covered against defects in materials and workmanship when properly installed and used under normal operating conditions, subject to the terms below.

One-Year Limited Warranty

Unless otherwise specified, Kleinn Automotive Accessories products are covered by a 1-year limited warranty from the original date of purchase.

This warranty applies to the original purchaser and covers defects in materials and workmanship under normal use.

If a product is determined to have a covered warranty defect, Kleinn Automotive Accessories will, at its discretion, repair or replace the defective product or component.

What Is Not Covered

This warranty does not cover damage or failure resulting from:

  • Improper installation
  • Misuse, abuse, or improper operation
  • Use outside the product's intended application or specifications
  • Modification or alteration of the product
  • Accidents or physical damage
  • Electrical damage
  • Environmental damage or exposure
  • Normal wear and tear

Kleinn Automotive Accessories is not responsible for installation or removal charges, diagnostic fees, labor costs, vehicle downtime, loss of use, or other incidental or consequential expenses associated with warranty service.

Warranty Claims

To request warranty service, email warranty@kleinn.com with the following information:

  • A copy of your original sales receipt or proof of purchase
  • Your full name
  • Email address
  • Telephone number
  • A brief description of the issue

A Kleinn representative will review your claim and may first attempt to resolve the issue through technical support.

If the product needs to be returned for inspection, Kleinn will provide a Return Authorization (RA) number and return instructions. Products should not be returned without prior authorization.

Once received, the product will be inspected to determine whether the issue is covered under warranty. If a covered defect in materials or workmanship is confirmed, Kleinn will, at its discretion, repair or replace the defective product or component.

If inspection determines that the product does not have a covered warranty defect, the product may be returned to the customer, and the customer will be responsible for applicable return shipping costs.

This limited warranty gives you specific legal rights. You may also have other rights, which vary from state to state.

Kleinn Automotive Accessories
4045 N. Highway Drive, Tucson, AZ 85705
Tel (520) 579-1531

What's the returns policy?

How To Return An Item

Your item must be in its original unused condition to be returned, unless there is a manufacturer defect. You must return the item within 30 days of your purchase.

1. Please email support@kleinn.com to request a refund and we will assign you a Return Authorization #.

2. Mail your returned item to:
Kleinn Automotive Accessories
Returns Department
4045 N Highway Drive
Tucson, AZ 85705

3. Include in your package a signed letter stating the reason for your return and the original receipt.

Return Non-Exceptions

Merchandise that has been worn, used, or altered will not be accepted for return or exchange.

Restocking Fee

All returns are subject to a 15% restocking fee, which will be deducted from your refund. If shipping and handling fees were applied to your order, they are non-refundable.