Model 52155: Mechanical Safety Relief Valve | 1/4" Male NPT | 155 PSI Pop-Off

Skip to product information

KL 52155

Regular price $9.95
Sale price $9.95 Regular price $9.95

💳 Get it today, pay over time with Shop Pay Installments.

In stock

PROP 65 WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

MODEL 52155: SAFETY RELIEF VALVE – 155 PSI POP-OFF – 1/4" NPT

ULTIMATE OVER-PRESSURE PROTECTION POLICY

Safeguard your heavy-duty pneumatic investment with the premium Kleinn Model 52155 Safety Relief Valve. While electronic pressure monitoring networks are designed to automatically cycle your compressor loop off at a set threshold, mechanical hardware failures can still happen. If an automated pressure control switch becomes stuck in the "ON" position, this mechanical pop-off safety valve acts as your permanent insurance policy—automatically venting storage tank air to the atmosphere the moment internal pressure hits 155 PSI, eliminating catastrophic over-pressurization risks.

THE AUDIBLE ALARM EARLY WARNING FAILSAFE

The Model 52155 is precision-engineered to double as an active acoustic diagnostic tool. If you hear this valve discharging repeated, high-pressure manual blasts of air under the chassis, it serves as an unmistakable early warning indicator that your primary pressure control framework has failed to interrupt current delivery. This immediate acoustic alarm lets you know to safely disconnect auxiliary system power and immediately replace your baseline control mechanism before expensive hardware or structural pneumatic loop lines are compromised.

Why Choose the 52155 Safety Relief Valve?

  • Built for 130 PSI Architectures: Calibrated specifically to safeguard configurations operating around a 130 PSI operational window rather than standard generic commercial relief valves.
  • Universal Tank Mounting: Features standard 1/4" Male NPT threads to thread cleanly and securely into any dedicated side or end port on a Kleinn air storage tank.
  • Precision-Calibrated Pop-Off: Tight structural seal limits air loss during normal cycles, remaining fully primed to vent immediate excess pressure right at 155 PSI.
  • Integrated Manual Pull Ring: Outfitted with a durable split manual ring, allowing operators to manually bleed or test tank storage pressure directly in the field.

THE VERDICT: The definitive safety valve for high-pressure configurations. The Model 52155 combines a reliable mechanical pop-off threshold with an audio warning capability, delivering the crucial failsafe backup your system needs to prevent dangerous over-pressurization on the highway or the trail.

⚠️ Important Compatibility Requirements

The Model 52155 Safety Valve is specialized hardware optimized exclusively for systems running a 130 PSI rating framework. To prevent premature venting or system leaks, this valve should always be paired with compressors and pressure switches engineered to cut out between 130 and 135 PSI.

Confirmed Kleinn Component & System Compatibility Matrix:

  • Compatible Air Systems: Model 6270 (130 PSI | 25% Duty Cycle | Light-Duty)
  • Universal ProBlaster™ Horn Kits: Models HK3, HK3-1, HK4, and HK4-1
  • Vehicle-Specific Upgrades: GMTRK-3 system footprints
  • Mandatory Matching Component: Engineered to pair with the Model 2131 Pressure Switch for automated system safety harmony.

What's Included in the Box

  • Safety Valve: One (1) Model 52155 – 155 PSI Pop-Off – 1/4" Male NPT Mechanical Safety Relief Valve.
  • Manual Interface: One (1) Heavy-duty split manual pull ring actuator pre-installed.

🔴 PRO TIP: Keep a permanent seal on your reservoir tank ports. When installing your 1/4" NPT safety valve, avoid over-torqueing into brass tank bungs to prevent stripping the threads. Always apply a few drops of liquid anaerobic thread sealant compound like our genuine Kleinn JUICE across the NPT male lead threads to block out slow, phantom pneumatic pressure drops.

PRODUCT SPECIFICATIONS

Feature Details
Part Number 52155
Component Classification Pneumatic Safety Relief Valve (Over-Pressure Failsafe)
Pop-Off Calibration Limit 155 PSI Maximum Actuation Boundary
Thread Connection Sizing 1/4" Male NPT (National Pipe Thread)
Primary System Target Optimized for Kleinn 130 PSI Air Systems
Manual Actuation Source Integrated Manual Spring-Loaded Pressure Bleed Pull Ring
Required Companion Switch Model 2131 Pressure Switch (130-135 PSI Cut-Out)
Model 52155: Mechanical Safety Relief Valve | 1/4" Male NPT | 155 PSI Pop-Off

$9.95

Does it come with a warranty?

Kleinn Automotive Accessories Limited Warranty

Kleinn Automotive Accessories stands behind the quality and craftsmanship of our products. Our products are covered against defects in materials and workmanship when properly installed and used under normal operating conditions, subject to the terms below.

One-Year Limited Warranty

Unless otherwise specified, Kleinn Automotive Accessories products are covered by a 1-year limited warranty from the original date of purchase.

This warranty applies to the original purchaser and covers defects in materials and workmanship under normal use.

If a product is determined to have a covered warranty defect, Kleinn Automotive Accessories will, at its discretion, repair or replace the defective product or component.

What Is Not Covered

This warranty does not cover damage or failure resulting from:

  • Improper installation
  • Misuse, abuse, or improper operation
  • Use outside the product's intended application or specifications
  • Modification or alteration of the product
  • Accidents or physical damage
  • Electrical damage
  • Environmental damage or exposure
  • Normal wear and tear

Kleinn Automotive Accessories is not responsible for installation or removal charges, diagnostic fees, labor costs, vehicle downtime, loss of use, or other incidental or consequential expenses associated with warranty service.

Warranty Claims

To request warranty service, email warranty@kleinn.com with the following information:

  • A copy of your original sales receipt or proof of purchase
  • Your full name
  • Email address
  • Telephone number
  • A brief description of the issue

A Kleinn representative will review your claim and may first attempt to resolve the issue through technical support.

If the product needs to be returned for inspection, Kleinn will provide a Return Authorization (RA) number and return instructions. Products should not be returned without prior authorization.

Once received, the product will be inspected to determine whether the issue is covered under warranty. If a covered defect in materials or workmanship is confirmed, Kleinn will, at its discretion, repair or replace the defective product or component.

If inspection determines that the product does not have a covered warranty defect, the product may be returned to the customer, and the customer will be responsible for applicable return shipping costs.

This limited warranty gives you specific legal rights. You may also have other rights, which vary from state to state.

Kleinn Automotive Accessories
4045 N. Highway Drive, Tucson, AZ 85705
Tel (520) 579-1531

What's the returns policy?

How To Return An Item

Your item must be in its original unused condition to be returned, unless there is a manufacturer defect. You must return the item within 30 days of your purchase.

1. Please email support@kleinn.com to request a refund and we will assign you a Return Authorization #.

2. Mail your returned item to:
Kleinn Automotive Accessories
Returns Department
4045 N Highway Drive
Tucson, AZ 85705

3. Include in your package a signed letter stating the reason for your return and the original receipt.

Return Non-Exceptions

Merchandise that has been worn, used, or altered will not be accepted for return or exchange.

Restocking Fee

All returns are subject to a 15% restocking fee, which will be deducted from your refund. If shipping and handling fees were applied to your order, they are non-refundable.