Model 1024: 250 PSI 1/4" NPT Stem Mount Single Needle Air Pressure Gauge

KL 1024

$14.95
$14.95 $14.95

💳 Get it today, pay over time with Shop Pay Installments.

In stock
PROP 65 WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

MODEL 1024: 250 PSI STEM-MOUNT MECHANICAL CHROME AIR PRESSURE GAUGE

DIRECT-TANK HIGH-PRESSURE MECHANICAL DIAL VERIFICATION

Keep a vigilant mechanical lock on your extreme pneumatic thresholds with the premium Kleinn Model 1024 Stem-Mount Air Pressure Gauge. Engineered as a heavy-duty, direct-reading diagnostic tool, this commercial-grade instrument features a rugged base stem architecture designed to thread straight into your air tank port or distribution manifold. Because it relies purely on mechanical Bourdon tube engineering, it requires absolutely no electrical wiring to give instantaneous, delay-free single-needle tracking for high-output setups operating near an extreme duty ceiling.

PREMIUM CHROME-PLATED BEZEL & HIGH-CONTRAST FIELD DISPLAY

The Model 1024 combines exceptional structural durability with a clean show-car finish, highlighted by its premium chrome-plated housing bezel. Boasting a crisp, high-contrast white dial face with a bold black pointer scale up to 250 PSI, it ensures excellent daytime clarity in custom engine bays or chassis setups. Outfitted with an integrated 1/4" Male NPT brass connection on the base, this mechanical gauge spins securely into standard tank bungs or custom manifold lines to deliver a permanent, leak-free anchor point without the need for complex internal wiring loops.

Why Choose the 1024 Stem-Mount Gauge?

  • 250 PSI Extended Needle Range: Precision-calibrated internal analog scale delivers real-time monitoring for extreme-duty, high-output air networks and train horn setups.
  • Premium Chrome-Plated Finish: Mirror-shine chrome bezel provides a striking aesthetic accent while offering heavy-duty defense against physical impact and road grime.
  • Purely Mechanical, Zero-Wire Operation: Non-illuminated design requires no 12V electrical connections—ideal for simple, trouble-free structural layout monitoring.
  • Direct-Thread 1/4" Male NPT Base: Rigid lower-mount stem connection spins cleanly into standard pneumatic tank bungs, distribution tees, or manifold lines without extra adapter fittings.

THE VERDICT: The definitive direct-read instrument for extreme-pressure configurations. The Model 1024 marries an extended 250 PSI capability with a rugged, non-electrical chrome stem-mount layout to guarantee your auxiliary storage tanks and train horn reservoirs remain perfectly verified and completely leak-free.

What's Included in the Box

  • Air Gauge: One (1) Kleinn Model 1024 250 PSI Stem-Mount Chrome Mechanical Air Pressure Gauge (Non-Illuminated).

🔴 PRO TIP: Lock out hidden pneumatic pressure drops and prevent your thread tracks from buckling. When winding this stem-mount gauge into your air tank port, manifold block, or T-splitter, use a flat wrench on the integrated brass base flats and avoid torqueing by the gauge body itself. Always apply a few drops of liquid anaerobic thread sealant compound like our genuine Kleinn JUICE across the 1/4" Male NPT threads to form a permanent, vibration-resistant structural seal.

PRODUCT SPECIFICATIONS

Feature Details
Part Number KL 1024 (1024)
Component Classification Direct-Read Stem-Mount Analog Mechanical Air Pressure Gauge
Pressure Measurement Range 0 to 250 PSI Extended Analog Sweep
Mounting Style Rigid Base Stem Lower-Mount
Needle Interface Single Needle (Dedicated High-Pressure Reservoir Tracking)
Dial Face Aesthetics High-Contrast White Face, Black Markings, and Chrome Bezel
Illumination Status Non-Illuminated (No Electrical Connections Required)
Connection Interface Sizing 1/4" Male NPT Integrated Brass Base Input
Primary Utility Application Direct-tank or block pressure monitoring for extreme 200 PSI automotive onboard air layouts, train horns, and custom air lines
Model 1024: 250 PSI 1/4" NPT Stem Mount Single Needle Air Pressure Gauge

$14.95

Does it come with a warranty?

Kleinn Automotive Accessories Limited Warranty

Kleinn Automotive Accessories stands behind the quality and craftsmanship of our products. Our products are covered against defects in materials and workmanship when properly installed and used under normal operating conditions, subject to the terms below.

One-Year Limited Warranty

Unless otherwise specified, Kleinn Automotive Accessories products are covered by a 1-year limited warranty from the original date of purchase.

This warranty applies to the original purchaser and covers defects in materials and workmanship under normal use.

If a product is determined to have a covered warranty defect, Kleinn Automotive Accessories will, at its discretion, repair or replace the defective product or component.

What Is Not Covered

This warranty does not cover damage or failure resulting from:

  • Improper installation
  • Misuse, abuse, or improper operation
  • Use outside the product's intended application or specifications
  • Modification or alteration of the product
  • Accidents or physical damage
  • Electrical damage
  • Environmental damage or exposure
  • Normal wear and tear

Kleinn Automotive Accessories is not responsible for installation or removal charges, diagnostic fees, labor costs, vehicle downtime, loss of use, or other incidental or consequential expenses associated with warranty service.

Warranty Claims

To request warranty service, email warranty@kleinn.com with the following information:

  • A copy of your original sales receipt or proof of purchase
  • Your full name
  • Email address
  • Telephone number
  • A brief description of the issue

A Kleinn representative will review your claim and may first attempt to resolve the issue through technical support.

If the product needs to be returned for inspection, Kleinn will provide a Return Authorization (RA) number and return instructions. Products should not be returned without prior authorization.

Once received, the product will be inspected to determine whether the issue is covered under warranty. If a covered defect in materials or workmanship is confirmed, Kleinn will, at its discretion, repair or replace the defective product or component.

If inspection determines that the product does not have a covered warranty defect, the product may be returned to the customer, and the customer will be responsible for applicable return shipping costs.

This limited warranty gives you specific legal rights. You may also have other rights, which vary from state to state.

Kleinn Automotive Accessories
4045 N. Highway Drive, Tucson, AZ 85705
Tel (520) 579-1531

What's the returns policy?

How To Return An Item

Your item must be in its original unused condition to be returned, unless there is a manufacturer defect. You must return the item within 30 days of your purchase.

1. Please email support@kleinn.com to request a refund and we will assign you a Return Authorization #.

2. Mail your returned item to:
Kleinn Automotive Accessories
Returns Department
4045 N Highway Drive
Tucson, AZ 85705

3. Include in your package a signed letter stating the reason for your return and the original receipt.

Return Non-Exceptions

Merchandise that has been worn, used, or altered will not be accepted for return or exchange.

Restocking Fee

All returns are subject to a 15% restocking fee, which will be deducted from your refund. If shipping and handling fees were applied to your order, they are non-refundable.

Customer Reviews

4.85 ★ (343)
Verified