Compressor Air Intake Relocation Kit "Snorkel System"

Skip to product information

KL 6810

Size
Regular price $29.95
Sale price $29.95 Regular price $29.95

💳 Get it today, pay over time with Shop Pay Installments.

In stock

PROP 65 WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

MODEL 6810 & 6811: REMOTE INTAKE SNORKEL FILTER KITS

CLEAN PATHWAY AIRFLOW. MAXIMUM PROTECTION.

Shield your onboard air infrastructure from severe trail conditions with the premium Kleinn Remote Intake Snorkel Filter Conversion Kit. Explicitly engineered to reroute your system's induction path, this specialized snorkel architecture allows you to relocate your compressor's vulnerable air intake filter far away from muddy frame rails or blistering hot engine bays. By drawing compressed air from an isolated, pristine indoor environment—such as inside a passenger cab, trunk compartment, or beneath a protective vehicle seat—this upgrade keeps your system breathing cleanly and smoothly.

ELIMINATE MOISTURE. EXTEND COMPONENT LIFESPAN.

Chassis-mounted filters constantly ingest ambient road mist, dust clouds, and rainwater, leading to internal tank rust and premature system failures. Ingesting cleaner, drier air through a Kleinn Remote Snorkel System significantly dampens moisture accumulation within your storage tank. This critical defensive measure preserves the structural interior of your tank and directly safeguards highly sensitive downstream components, extending the service lifecycle of your automated pressure switches, safety blow-off valves, and horn solenoids.

Why Choose a Kleinn Remote Snorkel Kit?

  • True Snorkel Protection: Safely moves the air intake location to a dry, clean area like a vehicle cab or trunk, keeping filter elements pristine during deep water crossings or dusty trail runs.
  • Defensive Moisture Control: Drastically limits damp condensation buildup inside the air tank, preventing performance-robbing rust scaling.
  • Component Lifespan Insurance: Provides ultimate protection for sensitive downstream pneumatic accessories like pressure switches and safety valves against moisture fouling.
  • All-Inclusive Hardware Loop: Ships fully loaded out-of-the-box with flexible push-to-connect air line, specialized thread adapters, and heavy-duty replacement filter elements.

THE VERDICT: The definitive reliability upgrade for chassis-mounted air networks. Kleinn Remote Intake Snorkel Kits insulate your compressor's lungs from trail dust and dampness, guaranteeing dry high-pressure delivery and permanent protection for your investment.

VARIATION SELECTION GUIDE

Review the exact compressor fitment matching matrix below to choose the precise snorkel conversion model tailored to your system layout:

  • Model 6810: Precision-engineered for a direct fit on the ultra-compact 6270RC air compressor unit.
  • Model 6811: Universally threaded direct fit for our heavy-duty compressor families, supporting the 6275RC, 6350RC, 6450RC, and 6650RC pump heads.

What's in the Box?

  • Filter Element Assembly: One (1) Kleinn high-efficiency heavy-duty replacement air intake filter with 2 replacement filter elements.
  • Pneumatic Extension Line: Flexible high-pressure routing 3/8" airline tubing
  • Thread Fittings Pack: Compressor-specific thread adapters and barbed end line couplers
  • Hardware Fasteners: Complete structural hardware packet for a clean, stable remote installation mount

VARIATION SELECTION SPECIFICATIONS

Part Number Product Type Primary Compressor Fitment Target Placement Footprint Pneumatic Fitting Type
6810 Remote Intake Snorkel Kit Kleinn Model 6270RC Cab Interior, Under Seat, Trunk Voids Compressor-Matched Thread Fitting
6811 Remote Intake Snorkel Kit Kleinn Models 6275RC, 6350RC, 6450RC, & 6650RC Cab Interior, Under Seat, Trunk Voids Heavy-Duty High-Flow Fitting

 

Compressor Air Intake Relocation Kit "Snorkel System"

$29.95

Does it come with a warranty?

Kleinn Automotive Accessories Limited Warranty

Kleinn Automotive Accessories stands behind the quality and craftsmanship of our products. Our products are covered against defects in materials and workmanship when properly installed and used under normal operating conditions, subject to the terms below.

One-Year Limited Warranty

Unless otherwise specified, Kleinn Automotive Accessories products are covered by a 1-year limited warranty from the original date of purchase.

This warranty applies to the original purchaser and covers defects in materials and workmanship under normal use.

If a product is determined to have a covered warranty defect, Kleinn Automotive Accessories will, at its discretion, repair or replace the defective product or component.

What Is Not Covered

This warranty does not cover damage or failure resulting from:

  • Improper installation
  • Misuse, abuse, or improper operation
  • Use outside the product's intended application or specifications
  • Modification or alteration of the product
  • Accidents or physical damage
  • Electrical damage
  • Environmental damage or exposure
  • Normal wear and tear

Kleinn Automotive Accessories is not responsible for installation or removal charges, diagnostic fees, labor costs, vehicle downtime, loss of use, or other incidental or consequential expenses associated with warranty service.

Warranty Claims

To request warranty service, email warranty@kleinn.com with the following information:

  • A copy of your original sales receipt or proof of purchase
  • Your full name
  • Email address
  • Telephone number
  • A brief description of the issue

A Kleinn representative will review your claim and may first attempt to resolve the issue through technical support.

If the product needs to be returned for inspection, Kleinn will provide a Return Authorization (RA) number and return instructions. Products should not be returned without prior authorization.

Once received, the product will be inspected to determine whether the issue is covered under warranty. If a covered defect in materials or workmanship is confirmed, Kleinn will, at its discretion, repair or replace the defective product or component.

If inspection determines that the product does not have a covered warranty defect, the product may be returned to the customer, and the customer will be responsible for applicable return shipping costs.

This limited warranty gives you specific legal rights. You may also have other rights, which vary from state to state.

Kleinn Automotive Accessories
4045 N. Highway Drive, Tucson, AZ 85705
Tel (520) 579-1531

What's the returns policy?

How To Return An Item

Your item must be in its original unused condition to be returned, unless there is a manufacturer defect. You must return the item within 30 days of your purchase.

1. Please email support@kleinn.com to request a refund and we will assign you a Return Authorization #.

2. Mail your returned item to:
Kleinn Automotive Accessories
Returns Department
4045 N Highway Drive
Tucson, AZ 85705

3. Include in your package a signed letter stating the reason for your return and the original receipt.

Return Non-Exceptions

Merchandise that has been worn, used, or altered will not be accepted for return or exchange.

Restocking Fee

All returns are subject to a 15% restocking fee, which will be deducted from your refund. If shipping and handling fees were applied to your order, they are non-refundable.