0
Days
0
Hours
0
Minutes
0
Seconds
LABOR DAY SALE • 15% OFF SITEWIDE • PRICES AS MARKED
Your cart is empty :(
Continue shoppingYour cart
Estimated total:
$0.00 USD
LABOR DAY SALE • 15% OFF SITEWIDE • PRICES AS MARKED
KL 6350
💳 Get it today, pay over time with Shop Pay Installments.
Couldn't load pickup availability
PROFESSIONAL GRADE PERFORMANCE
The Model 6350 delivers serious onboard air power with a high-output 100% duty cycle compressor engineered for continuous heavy-duty use. Its compact long-tank design maximizes performance while fitting tight vehicle installations. This professional-grade powerhouse system ensures rapid pneumatic response and relentless recovery reliability when running high-demand equipment on trucks, utility builds, and extreme trail rigs.
POWER BEYOND THE HORNS
The high-efficiency 3-gallon air tank provides massive air storage capacity to power train horns, inflate tires up to 35”, and support demanding air lockers and aftermarket suspension systems. To prevent structural oxidation and ensure long-term reliability in the field, the tank features an advanced internal anti-corrosion coating. Paired with a fully waterproof sealed compressor, this oil-less system is explicitly built to conquer the most rugged off-road environments.
ULTIMATE TRAIL COMPANION
Includes the premium INF-1 tire inflation kit with a 24’ heavy-duty hose, quick-connect fittings, and a professional-tier inflator gun. The inflator features a highly readable luminescent gauge, a secure clip-lock chuck, and an integrated pressure release valve, allowing you to manage air-down recovery cycles and trail operations with maximum efficiency.
THE VERDICT: The ultimate balance of continuous duty cycle and compact integration. The Model 6350 brings commercial-grade 150 PSI lung power to tight frames, offering off-roaders and vehicle builders a reliable, fully waterproofed pneumatic center.
AIR COMPRESSOR SPECIFICATIONS
| Feature | Details |
|---|---|
| Part Number | 6350RC |
| Warranty | 1-Year |
| Compressor Type | Waterproof Sealed, Oil-less |
| Motor Type | Permanent Magnetic |
| Snorkel Kit | 12' Remote Intake Airline |
| Voltage | 12V DC |
| Duty Cycle | 100% @ 100 PSI |
| Flow Rate | 2.0 CFM @ 0 PSI |
| Max Pressure | 150 PSI |
| Max Amp Draw | 21 Amps |
| Dimensions | 9.25” L x 4” W x 6.5” H |
| Mounting Holes | 7.32” L x 3.31” W |
| Mounting Note | Any Position Except Upside Down |
| Pressure Switch | P/N 2151 |
AIR TANK SPECIFICATIONS
| Feature | Details |
|---|---|
| Part Number | 6350RT |
| Warranty | 1-Year |
| Tank Capacity | 3-Gallon |
| Construction | Steel / Gloss Black |
| Internal Coating | Cortec Anti-Corrosion |
| Mounting Legs | 2 Legs / 4 Points |
| Ports | 5×1/4" NPT & 1×1/2" NPT |
| Hardware | Bolts, Nuts, Washers |
| Max Pressure | 200 PSI |
| Dimensions | 21” L x 8” W x 10” H |
AIR TANK FILL RATES
| Tank | Pressure Range | Fill Time |
|---|---|---|
| 2.5 Gallon | 0-150 PSI | 4:35 ±10 Sec |
| 2.5 Gallon | 110-150 PSI | 0:59 ±5 Sec |
| 5 Gallon | 0-150 PSI | 9:15 ±10 Sec |
| 5 Gallon | 110-150 PSI | 2:25 ±5 Sec |

$450.45
Kleinn Automotive Accessories stands behind the quality and craftsmanship of our products. Our products are covered against defects in materials and workmanship when properly installed and used under normal operating conditions, subject to the terms below.
Unless otherwise specified, Kleinn Automotive Accessories products are covered by a 1-year limited warranty from the original date of purchase.
This warranty applies to the original purchaser and covers defects in materials and workmanship under normal use.
If a product is determined to have a covered warranty defect, Kleinn Automotive Accessories will, at its discretion, repair or replace the defective product or component.
This warranty does not cover damage or failure resulting from:
Kleinn Automotive Accessories is not responsible for installation or removal charges, diagnostic fees, labor costs, vehicle downtime, loss of use, or other incidental or consequential expenses associated with warranty service.
To request warranty service, email warranty@kleinn.com with the following information:
A Kleinn representative will review your claim and may first attempt to resolve the issue through technical support.
If the product needs to be returned for inspection, Kleinn will provide a Return Authorization (RA) number and return instructions. Products should not be returned without prior authorization.
Once received, the product will be inspected to determine whether the issue is covered under warranty. If a covered defect in materials or workmanship is confirmed, Kleinn will, at its discretion, repair or replace the defective product or component.
If inspection determines that the product does not have a covered warranty defect, the product may be returned to the customer, and the customer will be responsible for applicable return shipping costs.
This limited warranty gives you specific legal rights. You may also have other rights, which vary from state to state.
Your item must be in its original unused condition to be returned, unless there is a manufacturer defect. You must return the item within 30 days of your purchase.
1. Please email support@kleinn.com to request a refund and we will assign you a Return Authorization #.
2. Mail your returned item to:
Kleinn Automotive Accessories
Returns Department
4045 N Highway Drive
Tucson, AZ 85705
3. Include in your package a signed letter stating the reason for your return and the original receipt.
Merchandise that has been worn, used, or altered will not be accepted for return or exchange.
All returns are subject to a 15% restocking fee, which will be deducted from your refund. If shipping and handling fees were applied to your order, they are non-refundable.