Model 307 Chrome Solenoid Air Valve - 1/4" OD Airline In, 1/4" M NPT Out.

KL 307

$26.95
$26.95 $26.95

💳 Get it today, pay over time with Shop Pay Installments.

In stock
PROP 65 WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

MODEL 307: VORTEX™ 4 CHROME 12-VOLT SOLENOID AIR VALVE

PROFESSIONAL GRADE PERFORMANCE

Bring rapid-fire pneumatic activation straight to your signaling setup with the premium Model 307 Vortex™ 4 Air Solenoid Valve. Utilized extensively on our compact air horns and smaller locomotive kits, this standard 12-volt cylindrical electronic valve is meticulously engineered for quick acoustic response and reliable high-pressure airflow control. Featuring a maximum operational pressure ceiling of 165 PSI, this valve ensures your horn receives a full, instantaneous burst of air line power every single time you hit the cockpit command button.

VERSATILE PLUMBING & NON-POLARIZED WIRING

The Model 307 is optimized for clean, space-saving plumbing integration, accepting a 1/4" O.D. high-pressure line directly into its pre-installed 200 PSI rated brass compression fitting inlet, paired with a heavy-duty 1/4" Male NPT outlet port. Electrical installation is exceptionally user-friendly; the two-wire electrical layout is completely non-polarized. Because the leads are non-polar, they can be utilized interchangeably for either your positive 12V horn signal output or chassis ground path, eliminating wiring confusion during custom integration. For large-diameter systems requiring extreme high-flow volume, step up to our heavy-duty Model VX6003 brass super-duty solenoid manifold valve.

Why Choose the 307 Solenoid?

  • Maximum Pressure Ceiling: Rated up to 165 PSI to comfortably handle robust, high-pressure automotive and off-road onboard air systems.
  • Dual-Wire Configuration: Non-polarized power lead wires allow interchangeable positive and ground hookups for a highly simplified installation loop.
  • Premium Cylindrical Finish: Sleek, mirror-polished chrome-plated casing offers excellent defense against road salt, engine compartment grime, and structural oxidation.
  • Precision Leak-Free Seals: Integrated 1/4" O.D. compression inlet fitting matches tightly with a 1/4" Male NPT threaded manifold block to isolate pressure drops.

THE VERDICT: The definitive electronic valve upgrade for crisp, rapid-fire horn performance. The Vortex™ 4 packs robust sealing architecture and a beautiful chrome casing into an ultra-reliable, compact footprint that integrates effortlessly onto any vehicle platform.

Vehicle & System Fitment

  • Kleinn Compact Air Horns: Functions as a direct factory replacement electronic valve for all compact model configurations: 101, 102, 102-1, 130, 130-1, 141, and 141-1.
  • Kleinn Train Horns: Engineered as a direct-fit direct replacement component for Model 220, Model 500, Model 501, and Model 630 multi-bell train horn setups.

PRODUCT SPECIFICATIONS

Feature Details
Solenoid Series Vortex™ 4 Cylindrical Valve
Operating Voltage 12-Volt DC
Maximum Input Pressure 165 PSI
Inlet Port Profile 1/4" O.D. Compression Fitting (Rated up to 200 PSI)
Outlet Port Profile 1/4" Male NPT Threads
Electrical Interface 2-Wire Lead Configuration (Non-Polarized / Interchangeable)
Exterior Material Structure Chrome-Plated Protective Metal Shell

MANUFACTURER INSTRUCTION LINKS

Model 307 Chrome Solenoid Air Valve - 1/4" OD Airline In, 1/4" M NPT Out.

$26.95

Does it come with a warranty?

Kleinn Automotive Accessories Limited Warranty

Kleinn Automotive Accessories stands behind the quality and craftsmanship of our products. Our products are covered against defects in materials and workmanship when properly installed and used under normal operating conditions, subject to the terms below.

One-Year Limited Warranty

Unless otherwise specified, Kleinn Automotive Accessories products are covered by a 1-year limited warranty from the original date of purchase.

This warranty applies to the original purchaser and covers defects in materials and workmanship under normal use.

If a product is determined to have a covered warranty defect, Kleinn Automotive Accessories will, at its discretion, repair or replace the defective product or component.

What Is Not Covered

This warranty does not cover damage or failure resulting from:

  • Improper installation
  • Misuse, abuse, or improper operation
  • Use outside the product's intended application or specifications
  • Modification or alteration of the product
  • Accidents or physical damage
  • Electrical damage
  • Environmental damage or exposure
  • Normal wear and tear

Kleinn Automotive Accessories is not responsible for installation or removal charges, diagnostic fees, labor costs, vehicle downtime, loss of use, or other incidental or consequential expenses associated with warranty service.

Warranty Claims

To request warranty service, email warranty@kleinn.com with the following information:

  • A copy of your original sales receipt or proof of purchase
  • Your full name
  • Email address
  • Telephone number
  • A brief description of the issue

A Kleinn representative will review your claim and may first attempt to resolve the issue through technical support.

If the product needs to be returned for inspection, Kleinn will provide a Return Authorization (RA) number and return instructions. Products should not be returned without prior authorization.

Once received, the product will be inspected to determine whether the issue is covered under warranty. If a covered defect in materials or workmanship is confirmed, Kleinn will, at its discretion, repair or replace the defective product or component.

If inspection determines that the product does not have a covered warranty defect, the product may be returned to the customer, and the customer will be responsible for applicable return shipping costs.

This limited warranty gives you specific legal rights. You may also have other rights, which vary from state to state.

Kleinn Automotive Accessories
4045 N. Highway Drive, Tucson, AZ 85705
Tel (520) 579-1531

What's the returns policy?

How To Return An Item

Your item must be in its original unused condition to be returned, unless there is a manufacturer defect. You must return the item within 30 days of your purchase.

1. Please email support@kleinn.com to request a refund and we will assign you a Return Authorization #.

2. Mail your returned item to:
Kleinn Automotive Accessories
Returns Department
4045 N Highway Drive
Tucson, AZ 85705

3. Include in your package a signed letter stating the reason for your return and the original receipt.

Return Non-Exceptions

Merchandise that has been worn, used, or altered will not be accepted for return or exchange.

Restocking Fee

All returns are subject to a 15% restocking fee, which will be deducted from your refund. If shipping and handling fees were applied to your order, they are non-refundable.

Customer Reviews

4.87 ★ (337)
Verified