Your cart is empty :(
Continue shoppingYour cart
Estimated total:
$0.00 USD
KL 1023
💳 Get it today, pay over time with Shop Pay Installments.
Couldn't load pickup availability
PRECISE MULTI-ZONE REAL-TIME PRESSURIZATION TRACKING
Take multi-tier visual control over your custom pneumatic metrics with the premium Kleinn Model 1023 Panel-Mount Air Pressure Gauge. Engineered as a highly accurate dual-source mechanical diagnostic station, this commercial-grade instrument provides simultaneous tracking for two independent sections of your system up to a 160 PSI ceiling. It serves as an essential instrumentation addition for advanced layouts, letting you monitor your primary storage tank reservoir and secondary suspension helper bags concurrently from a single location.
CHROME BEZEL STYLING & DEPENDABLE INLINE COUPLING
The Model 1023 features a classic 2-inch diameter circular housing accented by a timeless chrome bezel, designed to mount perfectly flush into dashboard pods, pillar mounts, or custom consoles using its integrated mounting bracket. Boasting an internally illuminated, high-contrast white dial face with a integrated 12V light bulb, it ensures lightning-fast, day-and-night legibility without creating distracting cockpit glare. Outfitted with dual compression fittings for standard 1/4" O.D. air lines on the back, this mechanical gauge hooks up directly to your independent distribution loops for a dependable, leak-free connection.
THE VERDICT: The definitive multi-zone monitoring instrument for clean vehicle cabins. The Model 1023 pairs distinct dual analog needle verification with an all-inclusive mechanical assembly to ensure your storage reservoirs and helper springs remain perfectly balanced, highly organized, and completely under control.
🔴 PRO TIP: Protect your vehicle cabin from slow pressure drops and line chafing. When running your twin high-pressure feedback lines from your air system through the firewall to wire up the rear stems of this gauge, always route them through a thick protective rubber grommet. Always use a dedicated pneumatic line cutter for perfectly square cuts, and apply a few drops of liquid anaerobic compound like our genuine Kleinn JUICE across any mating threaded connections to secure a permanent, leak-free mechanical lock.
PRODUCT SPECIFICATIONS
| Feature | Details |
|---|---|
| Part Number | KL 1023 (1023) |
| Component Classification | Panel-Mount Analog Mechanical Dual-Zone Air Pressure Gauge |
| Pressure Sizing Range | 0 to 160 PSI Analog Sweep Dial Face |
| Housing Diameter | 2-Inch Universal Panel Flush Fitment |
| Needle Configuration | Dual Needle Array (Displays Two Separate Pressure Readings) |
| Dial Face Aesthetics | High-Visibility White Face, Black Scale Markings, Chrome Bezel |
| Internal Illumination Source | Replaceable 12V Light Bulb Assembly Included |
| Air Line Inlet Ports | Dual (2) Rear-Entry Compression Fittings for 1/4" O.D. Air Lines |
| Mounting Profile | Integrated Panel-Mount Dash Bracket Included |
| Primary Utility Application | Flush in-cab dual-zone tracking for custom automotive onboard air layouts, air helper bags, and train horn configurations |

$49.95
Kleinn Automotive Accessories stands behind the quality and craftsmanship of our products. Our products are covered against defects in materials and workmanship when properly installed and used under normal operating conditions, subject to the terms below.
Unless otherwise specified, Kleinn Automotive Accessories products are covered by a 1-year limited warranty from the original date of purchase.
This warranty applies to the original purchaser and covers defects in materials and workmanship under normal use.
If a product is determined to have a covered warranty defect, Kleinn Automotive Accessories will, at its discretion, repair or replace the defective product or component.
This warranty does not cover damage or failure resulting from:
Kleinn Automotive Accessories is not responsible for installation or removal charges, diagnostic fees, labor costs, vehicle downtime, loss of use, or other incidental or consequential expenses associated with warranty service.
To request warranty service, email warranty@kleinn.com with the following information:
A Kleinn representative will review your claim and may first attempt to resolve the issue through technical support.
If the product needs to be returned for inspection, Kleinn will provide a Return Authorization (RA) number and return instructions. Products should not be returned without prior authorization.
Once received, the product will be inspected to determine whether the issue is covered under warranty. If a covered defect in materials or workmanship is confirmed, Kleinn will, at its discretion, repair or replace the defective product or component.
If inspection determines that the product does not have a covered warranty defect, the product may be returned to the customer, and the customer will be responsible for applicable return shipping costs.
This limited warranty gives you specific legal rights. You may also have other rights, which vary from state to state.
Your item must be in its original unused condition to be returned, unless there is a manufacturer defect. You must return the item within 30 days of your purchase.
1. Please email support@kleinn.com to request a refund and we will assign you a Return Authorization #.
2. Mail your returned item to:
Kleinn Automotive Accessories
Returns Department
4045 N Highway Drive
Tucson, AZ 85705
3. Include in your package a signed letter stating the reason for your return and the original receipt.
Merchandise that has been worn, used, or altered will not be accepted for return or exchange.
All returns are subject to a 15% restocking fee, which will be deducted from your refund. If shipping and handling fees were applied to your order, they are non-refundable.