Model 54484: 4-Port Brass Manifold | (3) 1/4" Female NPT & (1) 1/8" Male NPT

KL 54484

$16.95
$16.95 $16.95

💳 Get it today, pay over time with Shop Pay Installments.

Out of stock
PROP 65 WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Sorry, it's out of stock.

But we can let you know when it's back in.

MODEL 54484: 4-PORT BRASS MANIFOLD – (3) 1/4" F NPT & (1) 1/8" M NPT

SPECIALIZED MULTI-SIZE DISTRIBUTION BLOCK FOR COMPLEX BUILD ARCHITECTURES

Optimize layout paths and expand the structural capabilities of your onboard air loop with the premium Kleinn Model 54484 4-Port Brass Manifold. Precision-engineered as a specialized multi-size distribution block, this commercial-grade plumbing component is the perfect solution for customs configurations where you need to cleanly integrate multiple accessories of varying sizes into a single localized port. It consolidates independent paths to handle standard line transit and delicate monitoring lines concurrently from one compact hub position.

STREAMLINED ACCESSORY INTEGRATION & COMPACT GEOMETRY

With its unique 4-port orientation, the Model 54484 features one 1/8" Male NPT lead stem branch alongside three 1/4" Female NPT receiver distribution openings. The dedicated 1/8" M NPT port is specifically tailored to thread directly into specialized air tanks or manifolds featuring smaller 1/8" bungs. Machined entirely from premium solid industrial brass, this space-efficient fitting consolidates layout architecture inside crowded engine bays, dashboard consoles, or tank networks while holding a deep mechanical seal resistant to aggressive automotive chassis vibrations.

Why Choose the 54484 4-Port Brass Manifold?

  • Multi-Size Versatility: Asymmetrical configuration combines one (1) 1/8" Male NPT input branch with three (3) 1/4" Female NPT distribution hubs for multi-tier component management.
  • Direct Accessory Integration: Sized to connect larger air supply lines while simultaneously providing a dedicated mechanical port for auxiliary pressure switches, sensors, or safety valves.
  • Heavy-Duty Brass Construction: Precision-machined entirely from industrial-grade solid brass for maximum corrosion resistance and structural endurance under severe pneumatic cycles.
  • Space-Efficient Plumbing Profile: Eliminates unneeded stacked adapters, tees, and expansion adapters by consolidating up to four independent paths into one clean fitting.
  • Vibration Resistant Thread Cuts: Precision-cut thread engagement limits air drop-offs, ensuring an airtight system threshold even under aggressive highway or off-road off-grid conditions.

THE VERDICT: The definitive multi-port junction blocks for tight-clearance builds. The Model 54484 marries structural solid brass casting with deep multi-size thread precision to guarantee your accessories, gauges, and air distribution runs remain perfectly linked and completely leak-free.

What's Included in the Box

  • 4-Port Manifold Block: One (1) Model 54484 Brass 4-Way Adapter Block featuring (1) 1/8" Male NPT port and (3) 1/4" Female NPT distribution hubs.

🔴 PRO TIP: Lock down a perfect structural seal across your custom accessory networks. When installing lines or sensors into this brass multi-port manifold, avoid over-torqueing to protect the walls from splitting or micro-fracturing. Always apply a few drops of liquid anaerobic thread sealant like our genuine Kleinn JUICE across all male NPT thread leads to completely insulate against slow, phantom pneumatic pressure drops.

PRODUCT SPECIFICATIONS

Feature Details
Part Number KL 54484 (54484)
Fitting Interface Type 4-Port Multi-Size Asymmetrical Pneumatic Manifold Distribution Block
Male Connection Sizing (1) 1/8" Male NPT (National Pipe Thread)
Female Connection Sizing (3) 1/4" Female NPT (National Pipe Thread)
Material Composition Precision Machined Industrial-Grade Solid Brass Construction
Primary Utility Application Consolidating multiple 1/4" NPT accessory lines and components into smaller 1/8" NPT receiver bungs
Component Weight 0.25 lbs

 

Does it come with a warranty?

Kleinn Automotive Accessories Limited Warranty

Kleinn Automotive Accessories stands behind the quality and craftsmanship of our products. Our products are covered against defects in materials and workmanship when properly installed and used under normal operating conditions, subject to the terms below.

One-Year Limited Warranty

Unless otherwise specified, Kleinn Automotive Accessories products are covered by a 1-year limited warranty from the original date of purchase.

This warranty applies to the original purchaser and covers defects in materials and workmanship under normal use.

If a product is determined to have a covered warranty defect, Kleinn Automotive Accessories will, at its discretion, repair or replace the defective product or component.

What Is Not Covered

This warranty does not cover damage or failure resulting from:

  • Improper installation
  • Misuse, abuse, or improper operation
  • Use outside the product's intended application or specifications
  • Modification or alteration of the product
  • Accidents or physical damage
  • Electrical damage
  • Environmental damage or exposure
  • Normal wear and tear

Kleinn Automotive Accessories is not responsible for installation or removal charges, diagnostic fees, labor costs, vehicle downtime, loss of use, or other incidental or consequential expenses associated with warranty service.

Warranty Claims

To request warranty service, email warranty@kleinn.com with the following information:

  • A copy of your original sales receipt or proof of purchase
  • Your full name
  • Email address
  • Telephone number
  • A brief description of the issue

A Kleinn representative will review your claim and may first attempt to resolve the issue through technical support.

If the product needs to be returned for inspection, Kleinn will provide a Return Authorization (RA) number and return instructions. Products should not be returned without prior authorization.

Once received, the product will be inspected to determine whether the issue is covered under warranty. If a covered defect in materials or workmanship is confirmed, Kleinn will, at its discretion, repair or replace the defective product or component.

If inspection determines that the product does not have a covered warranty defect, the product may be returned to the customer, and the customer will be responsible for applicable return shipping costs.

This limited warranty gives you specific legal rights. You may also have other rights, which vary from state to state.

Kleinn Automotive Accessories
4045 N. Highway Drive, Tucson, AZ 85705
Tel (520) 579-1531

What's the returns policy?

How To Return An Item

Your item must be in its original unused condition to be returned, unless there is a manufacturer defect. You must return the item within 30 days of your purchase.

1. Please email support@kleinn.com to request a refund and we will assign you a Return Authorization #.

2. Mail your returned item to:
Kleinn Automotive Accessories
Returns Department
4045 N Highway Drive
Tucson, AZ 85705

3. Include in your package a signed letter stating the reason for your return and the original receipt.

Return Non-Exceptions

Merchandise that has been worn, used, or altered will not be accepted for return or exchange.

Restocking Fee

All returns are subject to a 15% restocking fee, which will be deducted from your refund. If shipping and handling fees were applied to your order, they are non-refundable.

Customer Reviews

4.85 ★ (343)
Verified