Model 51414BT: Push-to-Connect Branch "T" Splitter for (2) 1/4" OD Airlines | 1/4" Male NPT Threaded

KL 51414BT

$5.49
$5.49 $5.49

💳 Get it today, pay over time with Shop Pay Installments.

In stock
PROP 65 WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

MODEL 51414BT: 1/4" MALE NPT BRANCH PUSH-TO-CONNECT "T" FITTING

EFFICIENT THREE-WAY ADAPTATION & COMPREHENSIVE AIR ROUTING

Simplify complex multi-line plumbing paths and expand your onboard air capabilities with the premium Kleinn Model 51414BT Branch Push-to-Connect "T" Fitting. Custom-engineered to serve as a high-flow split hub, this commercial-grade branch tee features a 1/4" Male NPT thread branch on the bottom and two 1/4" Outside Diameter (O.D.) push-to-connect ports on top. This advanced matrix allows you to split a single air source into two separate run directions straight from a single manifold or storage tank port, entirely eliminating the need for bulky stacked adapter fittings.

SWIVEL-BASE FLUID ALIGNMENT & TOOL-FREE HOSE RETENTION

The Model 51414BT features advanced push-to-connect (PTC) sockets that replace conventional mechanical ferrules and nuts, letting you secure 1/4" O.D. lines instantly by pushing the raw tube end directly into the lock ring. To deliver maximum installation versatility in tight spaces, the threaded male base incorporates a premium swivel architecture. This layout allows you to freely rotate and orient the upper "T" junction in any direction after the threads are tightened down, ensuring perfect air line alignment along vehicle chassis rails, firewalls, or bumper wells.

Why Choose the 51414BT Branch T-Splitter?

  • Efficient Branch Tee Geometry: Allows for a clean 90-degree multi-line split directly from an empty 1/4" NPT tank or manifold port, saving valuable installation space.
  • Instant Push-to-Connect Ports: Symmetrical dual ports accommodate 1/4" O.D. tubing with zero requirement for wrenches or manual compression sleeves—just push to secure.
  • Orientable Swivel Thread Base: Rotates independently after tightening, enabling installers to align line paths flawlessly and eliminate structural routing strain.
  • High-Pressure Internal Seals: Precision-engineered internal O-rings and high-strength gripping teeth lock onto nylon lines to maintain an airtight seal under heavy vibration and extreme PSI.
  • Industrial Strength Build Quality: Precision-machined for unyielding performance and superior corrosion resistance in harsh, exposed under-vehicle environments.

THE VERDICT: The definitive swivel branch tee for quick-assembly air networks. The Model 51414BT marries tool-free push-to-connect speed with an adjustable swivel base to guarantee your multi-horn systems and air accessories remain cleanly plumbed and completely leak-free.

What's Included in the Box

  • Branch Tee Fitting: One (1) Model 51414BT Swivel 1/4" Male NPT to Dual 1/4" O.D. Tube Push-to-Connect "T" Adapter.

🔴 PRO TIP: Lock down an absolute leak-proof seal across your multi-horn lines. Before snapping your 1/4" O.D. high-pressure tubing into either push-to-connect socket, use a dedicated pneumatic hose cutter to slice the lines completely square and clean. Jagged edges or angled cuts from wire snips will score the internal rubber O-rings, leading to slow, hidden system pressure drops that cause your compressor to cycle on unnecessarily.

PRODUCT SPECIFICATIONS

Feature Details
Part Number KL 51414BT (51414BT)
Fitting Interface Type 90° Swivel Branch "T" Push-to-Connect Adapter
Male Connection Sizing 1/4" Male NPT (National Pipe Thread) Base Branch
Tube Connection Sizing Dual (2) 1/4" O.D. (Outer Diameter) Push-to-Connect Ports
Connection Technology Tool-Free Push-to-Connect (PTC) Sockets with Independent Swivel Base
Material Composition Precision Machined Industrial-Grade Weather-Resistant Construction
Primary Utility Application Splitting a single 1/4" NPT air source port into dual 1/4" O.D. lines to feed multiple air horns or accessories concurrently
Component Weight 0.15 lbs

 

Model 51414BT: Push-to-Connect Branch "T" Splitter for (2) 1/4" OD Airlines | 1/4" Male NPT Threaded

$5.49

Does it come with a warranty?

Kleinn Automotive Accessories Limited Warranty

Kleinn Automotive Accessories stands behind the quality and craftsmanship of our products. Our products are covered against defects in materials and workmanship when properly installed and used under normal operating conditions, subject to the terms below.

One-Year Limited Warranty

Unless otherwise specified, Kleinn Automotive Accessories products are covered by a 1-year limited warranty from the original date of purchase.

This warranty applies to the original purchaser and covers defects in materials and workmanship under normal use.

If a product is determined to have a covered warranty defect, Kleinn Automotive Accessories will, at its discretion, repair or replace the defective product or component.

What Is Not Covered

This warranty does not cover damage or failure resulting from:

  • Improper installation
  • Misuse, abuse, or improper operation
  • Use outside the product's intended application or specifications
  • Modification or alteration of the product
  • Accidents or physical damage
  • Electrical damage
  • Environmental damage or exposure
  • Normal wear and tear

Kleinn Automotive Accessories is not responsible for installation or removal charges, diagnostic fees, labor costs, vehicle downtime, loss of use, or other incidental or consequential expenses associated with warranty service.

Warranty Claims

To request warranty service, email warranty@kleinn.com with the following information:

  • A copy of your original sales receipt or proof of purchase
  • Your full name
  • Email address
  • Telephone number
  • A brief description of the issue

A Kleinn representative will review your claim and may first attempt to resolve the issue through technical support.

If the product needs to be returned for inspection, Kleinn will provide a Return Authorization (RA) number and return instructions. Products should not be returned without prior authorization.

Once received, the product will be inspected to determine whether the issue is covered under warranty. If a covered defect in materials or workmanship is confirmed, Kleinn will, at its discretion, repair or replace the defective product or component.

If inspection determines that the product does not have a covered warranty defect, the product may be returned to the customer, and the customer will be responsible for applicable return shipping costs.

This limited warranty gives you specific legal rights. You may also have other rights, which vary from state to state.

Kleinn Automotive Accessories
4045 N. Highway Drive, Tucson, AZ 85705
Tel (520) 579-1531

What's the returns policy?

How To Return An Item

Your item must be in its original unused condition to be returned, unless there is a manufacturer defect. You must return the item within 30 days of your purchase.

1. Please email support@kleinn.com to request a refund and we will assign you a Return Authorization #.

2. Mail your returned item to:
Kleinn Automotive Accessories
Returns Department
4045 N Highway Drive
Tucson, AZ 85705

3. Include in your package a signed letter stating the reason for your return and the original receipt.

Return Non-Exceptions

Merchandise that has been worn, used, or altered will not be accepted for return or exchange.

Restocking Fee

All returns are subject to a 15% restocking fee, which will be deducted from your refund. If shipping and handling fees were applied to your order, they are non-refundable.

Customer Reviews

4.87 ★ (337)
Verified